how to stretch wire mesh fence

Navigating the job of stretching a wire mesh fence might seem intimidating at first to anyone embarking on the task, but with the correct resources and methods, the process can be fairly straightforward. Whether permanently affixing a brand-new fence or replacing an old one, properly stretching the mesh is paramount. Herein lies a brief guide on how to stretch wire mesh fence safely and skillfully.

To stretch a wire mesh fence, you will need some specific items. Acquire yourself a set of fence pliers and wire cutters, plus protective gloves; likewise, you’ll need a spool of wire. Additionally, you must have either an anchor post or tension post, an object which needs to be buried into the earth to offer extra strain while pulling the wire tight.

With everything in order, it’s time to start stretching the wire mesh fence. Measure the distance between the posts, carefully mark them off, then snip the mesh with your fence pliers. Leave enough to wrap around each post firmly so that it is secured into place.

After that, you’ll need to affix the stretching post to the anchoring post. Using the wire cutters, trim a piece of wire extensive enough to make its way from the anchor post to the stretch post. Bundle it several times around the anchoring post so it is fully connected. Proceed by running it through the mesh and looping around the stretch post multiple times. Finally, tug firmly on it and secure with a knot or clamp.

Securely attaching the wires to the posts is the first step, now it’s time to stretch that net! To do this, you’ll need a turnbuckle – think of it as a tool used to exercise control over the tension on the wires. As you gradually tighten the turnbuckle, the netting will give way and stretch out. Just make sure you don’t overdo it – cranking it too much could easily lead to withered cords and an irreparable break.

After the wire mesh has been stretched securely across the posts, use the fence pliers to secure the edges of the wire. To prevent it from snapping, be sure to leave an inch or two of loosened mesh. Once this is done, snip off any extra material with the wire cutters.

Wiring a fence can seem intimidating at first, but it’s actually fairly straightforward with the right equipment and attention to detail. Take the time to do it properly, and you’ll soon be able to secure your mesh fence with confidence. With a bit of practice, stretching wire will become second nature.

Installing a wire mesh fence is a doable task that often requires few materials and tools. Furthermore, the barrier will remain standing and its look will remain pleasing over the long-term. While there are multiple methods to stretch a wire mesh fence, some of which needing specific supplies and steps, this post explains in detail the best way to tackle the task, outlining each move as you construct your fence.

The Phenomenon of the Wire Mesh Fence

Securely Attaching Your Fence – Clips or Zip Ties

Estimate the Size of Your Boundary

When getting started, make sure to be precise with your measurements. Gauge the length and width of your fence and then add a few extra inches to each number. Doing this will guarantee that you get enough material to successfully stretch the wire mesh fence.

Affixing the Fence Tautener – The Second Step

With the exact measurements of your desired fence noted, it’s time to equip the structure with a signature device: the fence tensioner. This device helps draw and stabilize the fence in place, and can be attached through either fence clips or zipping pieces together with special ties.

Secure the Barrier: Stretching the Fence

After the fence tensioner is in place, you can stretch the fence by connecting it to the stretcher. Slowly pull using it in a back-and-forth motion until you feel the fence is tense and tightly secured.

Acquire a Fence for Security

For the fence to hold its shape, secure it to the posts with clips or ties. Remember to avoid pulling the fence too tightly, as it could lead to sagging with age. Leave a few inches of slack for extra stability.

Step 5: Ensure Balance.

The accomplishment of a perfectly straight fence requires a level eye, and luckily you can rely on a spirit level to do just that. Simply place the measure along the top of the fence to spot any potential discrepancies. If found, you will need to make the necessary alterations, such as adjusting the tensioner or installing some fence clips, to ensure that all sides are properly balanced and even.

Taking your time to complete each step, you can adjust and stretch your wire mesh fence to perfection. Although it may take some effort, you’ll be rewarded with a handsome boundary that will stand the test of time. Your freshly constructed fence will be a secure and stylish addition to your property for years to come.

Related Product