wire mesh for parging

Enlivening the exterior of a wall or other structure is what parging is all about, accomplished by artfully applying a plaster or concrete-like material. To ensure longevity, wire mesh is commonly added to the mix, reinforcing the material and providing an extra measure of protection against splitting down the line.

A wide selection of wire meshes are on the market and come in various2 inch (51 mm), 3 inch (76 mm) and 4 inch (102 mm) widths. Simultaneously, 1/2 inch (13 mm), 3/4 inch (19 mm) and 1 inch (25 mm) mesh sizes are most prevalent.

When looking to protect a masonry wall, parging is often used in a two or three-step process. The beginning layer, referred to as the scratch coat, is applied by hand with a trowel. The second layer, known as the brown coat, is applied also with a trowel or a brush. Finally the finish coat, which may or may not be used, is put onto the surface with either a trowel or brush.

Plaster or concrete can be reinforced with wire mesh, placed discreetly within the scratch coat. This mesh will remain unseen once embedded in the material, providing unseen support.

Situated directly above the scratch coat, the thin sheen of brown parge coats the wall in a protective layer, amplified yet unaided by reinforcement.

The final step of the parging procedure is to add the finish coat, slighter than the prior two coats and not needing any additional reinforcement.

Parging is a process primarily used on concrete, brick, stone, and CMU walls, however, it is not limited to those materials – wood, metal and glass can also be parged.

From soothing whites to vibrant shades, parging can come in a rainbow of colors. Blended pigments provide the necessary ingredients to produce a spectrum of choice that can fit the needs of various projects.

Utilizing a process known as parging, cement can be applied both inside and out of many kinds of structures such as garages, basements, and foundations. This type of exterior wall coating is used to create an effective barrier afford protection and enhance aesthetics.

A cost-effective enhance to the look of your wall or any other structure can be quickly achieved through parging. In addition, it is an excellent method for restoring broken portions of walls.

As a rule, applying parging on structural walls is not recommended, for it could add an extra strain to the wall’s internal structure and possibly lead to its downfall.

Those with a knack for stonework should enlist the aid of a reputable and skilled paragrapher for any parging-related projects.

Related Product